The products included here represent a small number of the many home care products which are available. Please contact us for further information about these products or any other home medical equipment need you might have.

Universal Homecare Bed

10076-1

Frame is constructed of 10-gauge high-strength, low-alloy, cold-rolled steel for added strength. The head spring section is reinforced on each side to prevent racking and bending. All actuators use free wheeling (slip) clutches to eliminate the problems associated with unsynchronized components. Casters are 3″: 2 locking and 2 non-locking. All motors are 1/10 HP, 115 Volts/60 Hz, 1.6 amps. Vinyl-clad capping on bed ends is durable and mar-resistant. All beds accommodate 36″ x 80″ mattresses. 450 lb maximum weight capacity.

Manufacturer: Graham Field

Order / Info Request

Universal Homecare Bed

10076-1

Frame is constructed of 10-gauge high-strength, low-alloy, cold-rolled steel for added strength.
• The head spring section is reinforced on each side to prevent racking and bending.
• All actuators use free wheeling (slip) clutches to eliminate the problems associated with unsynchronized components.
• Casters are 3″: 2 locking and 2 non-locking.
• All motors are 1/10 HP, 115 Volts/60 Hz, 1.6 amps and are protected from damage caused by misuse of the hand pendant via an override protection switch.
• Vinyl-clad capping on bed ends is durable and mar-resistant.
• All beds accommodate 36″ x 80″ mattresses.
• 450 lb maximum weight capacity.

Manufacturer: Graham Field

Order / Info Request

Universal Homecare Bed

10076-1

Frame is constructed of 10-gauge high-strength, low-alloy, cold-rolled steel for added strength.
• The head spring section is reinforced on each side to prevent racking and bending.
• All actuators use free wheeling (slip) clutches to eliminate the problems associated with unsynchronized components.
• Casters are 3″: 2 locking and 2 non-locking.
• All motors are 1/10 HP, 115 Volts/60 Hz, 1.6 amps and are protected from damage caused by misuse of the hand pendant via an override protection switch.
• Vinyl-clad capping on bed ends is durable and mar-resistant.
• All beds accommodate 36″ x 80″ mattresses.
• Designed to meet the requirements of applicable HCPCS codes.
• 450 lb maximum weight capacity.

Manufacturer: Graham Field

Order / Info Request

Matrix Plus

11026-1

Product Detail

The comes with many standard features, including sleep deck height adjustment from 8.75 ” to 25.25″ and a single motor for Hi-Lo function that ensures the bed is always level. It has a dynamic operating capacity of 400 lb and meets the highest UL safety standards for medical beds UL60601 and EN60601. The bed may be rolled or locked at any height with a single-point locking mechanism.
It has strong tubular panel mounting which enables the bed to be pushed or pulled by footboard, and built-in stabilizer feet that ensure the bed will automatically lock in the lowest position. The bed system is patent pending.
Specifications:
• Sleep deck dimensions: 35″ width, and 76″ or 80″ sleep deck lengths.
• Maximum head elevation of 70 degrees.
• Sleep surface constructed of strong steel wire grid: no plastic or springs are used.
• Rigid construction utilizing heavy tubular steel to maximize strength and stability of the sleep surface in all positions.
• All weldments and components are electrostatically powder-coated or plated.
• 115-Volt standard. 230 Volt available
• Full-Electric operation with only three ultra whisper quiet, rapid-moving DC motors.
• Standard with handheld 6-function control.

Additional Accessories – Please Call for Details:
• Foot Half Rails
• Wall Saver Bumpers
• Edema Foot Ratchet
• Pan Deck Sleep Surface
• 4″ Sleep Deck Extension
• Trapeze Adapter

Warranty:
• Welded steel bed frame: Limited Lifetime.
• All other components: Five Years.
• Electronics: Two Years

Inventory
Stock Code Description Color Packaging HCPCS
MP5074 Grid Deck, Full-Electric, 76″ Length 1 ea E0297

MP5714 Grid Deck, Full-Electric, 80″ Length 1 ea E0297

Z46500 Head and Foot Boards Light Oak Finish

Z48500 Head and Foot Boards Medium Oak Finish

Z80500 Head and Foot Boards Dark Walnut Finish

Z46550 Head and Foot Boards, Staff Control Option Light Oak Finish

Z48550 Head and Foot Boards, Staff Control Option Medium Oak Finish

Z80550 Head and Foot Boards, Staff Control Option Dark Walnut Finish

ZA7020 Half Head Rails (Set)

AZ7350 Assist Bar (1 Each)

ZL71510 Factory-Installed option – Single-Function Lock-Out

ZL71530 Factory-Installed option – Three-Function Lock-Out

ZL74700 Factory-Installed option – Embedded Staff Control

999-0711-005 Factory-Installed option – Grounded Hospital-Grade Plug

999-0711-003 Back-Up Battery Pack

999-0711-002 Back-Up Battery Charger

554-0143-000 Trapeze Bar (Patient Helper Bar)

554-0190-000 Panel-Mounted I.V. Holder

554-0713-000 Side Mattress Retainer (Pair)

Manufacturer: Graham Field

Order / Info Request

Matrix Plus

12472-1

The Matrix Plus comes with many standard features, including sleep deck height adjustment from 8.75 ” to 25.25″ and a single motor for Hi-Lo function that ensures the bed is always level. It has a dynamic operating capacity of 400 lb and meets the highest UL safety standards for medical beds UL60601 and EN60601. CAN/CSA C22.2 No. 601-1-M90 approved.
It has strong tubular panel mounting which enables the bed to be pushed or pulled by footboard, and built-in stabilizer feet that ensure the bed will automatically lock in the lowest position. The bed features individual locking casters. The bed system is patent pending.
Specifications:
• Sleep deck dimensions: 35″ width, and 76″ or 80″ sleep deck lengths.
• Maximum head elevation of 70 degrees.
• Sleep surface constructed of strong steel wire grid: no plastic or springs are used.
• Rigid construction utilizing heavy tubular steel to maximize strength and stability of the sleep surface in all positions.
• All weldments and components are electrostatically powder-coated or plated.
• 115-Volt standard. 230 Volt available
• Full-Electric operation with only three ultra whisper quiet, rapid-moving DC motors.
• Standard with handheld 6-function control.

Additional Accessories –
• Foot Half Rails
• Wall Saver Bumpers
• Edema Foot Ratchet
• Pan Deck Sleep Surface
• 4″ Sleep Deck Extension
• Trapeze Adapter
Warranty:
• Bed: 15 years
• Electronics and Motor: Two Years

Manufacturer: Graham Field

Order / Info Request

Long Term Care Beds >> Flex Bed

11028-1

Product Detail

• Fixed Height, Hi-Lo Manual, Semi-Electric and Full-Electric available.
• Available in 76″ and 80″ sleep deck lengths.
• Low position 14.5″, maximum height 26″.
• Available with spring or pan sleep deck.
• Stabilizing legs standard.
• Durable powder-coated epoxy finish.
• Embedded Staff Control Availible- Please Call for Details
• 400 lb weight capacity.
• UL 2601-1 and CAN/CSA C22.2 No. 601-1-M90 approved.
• Designed to meet the requirements of applicable HCPCS codes.
• Warranty: 1. Welded steel bed frame: Limited Lifetime. 2. All other components: Five Years. 3. Electronics: Two Years

Inventory
Stock Code Description Color Packaging HCPCS
AF4001 Spring Deck, Fixed Height, 76″ Length 1 ea E0291

AF4101 Spring Deck, Fixed Height, 80″ Length 1 ea E0291

AF4011 Pan Deck, Fixed Height, 76″ Length 1 ea E0291

AF4111 Pan Deck, Fixed Height, 80″ Length 1 ea E0291

AF4000 Spring Deck, Manual Hi-Lo, 76″ Length 1 ea E0293

AF4100 Spring Deck, Manual Hi-Lo, 80″ Length 1 ea E0293

AF4010 Pan Deck, Manual Hi-Lo, 76″ Length 1 ea E0293

AF4110 Pan Deck, Manual Hi-Lo, 80″ Length 1 ea E0293

AF4005 Spring Deck, Semi-Electric, 76″ Length 1 ea E0295

AF4105 Spring Deck, Semi-Electric, 80″ Length 1 ea E0295

AF4015 Pan Deck, Semi-Electric, 76″ Length 1 ea E0295

AF4115 Pan Deck, Semi-Electric, 80″ Length 1 ea E0295

AF4004 Spring Deck, Full-Electric, 76″ Length 1 ea E0297

AF4104 Spring Deck, Full-Electric, 80″ Length 1 ea E0297

AF4014 Pan Deck, Full-Electric, 76″ Length 1 ea E0297

AF4114 Pan Deck, Full-Electric, 80″ Length 1 ea E0297

AB46300 Head and Foot Boards Light Oak Finish

AB48300 Head and Foot Boards Medium Oak Finish

AB80300 Head and Foot Boards Dark Walnut Finish

A7040 Half Head Rails (Set)

A7050 Half Foot Rails (Set)

A7060 3/4 Length Rail- 54″ Length (Set)

A7070 Full Length Rail- 66″ Length (Set)

AZ7350 Assist Bar (1 Each)

A65476 Wall Saver Bumpers, 76″ Bed

A65480 Wall Saver Bumpers, 80″ Bed

999-0700-355 Factory-Installed options – Pull Pin Pendant L/O CA

554-0658-000 Factory-Installed options – Edema Foot Ratchet

555-0206-902 Emergency Crank

554-0639-000 Trapeze Adapter

556-0005-000 Traction Frame Adapter (2 Req)

554-0143-000 Trapeze Bar (Patient Helper Bar)

554-0190-000 Panel-Mounted I.V. Holder

554-0713-000 Side Mattress Retainer (Pair)

Manufacturer: Graham Field

Order / Info Request

Long Term Care Beds >> Eze-Lok

11027-1

Product Detail

This bed represents a true engineering breakthrough, combining long term care needs with acute care features. The Eze-Lok™ bed features a single pedal to secure the bed to the floor at any sleep surface height. The color-coded pedals show green for mobile and red for securely-locked.
• 12″ Low deck height.
• Available in Manual Hi-Lo, Semi-Electric and Full-Electric.
• Available with spring or pan sleep deck.
• Durable powder-coated epoxy finish.
• Designed to meet the requirements of applicable HCPCS codes.
• 400 lb weight capacity.
• UL 2601-1 and CAN/CSA C22.2 No. 601-1-M90 approved.
• Available in 76″, 80″, or 84″ sleep deck lengths.
• Warranty: 1. Welded steel bed frame: Limited Lifetime. 2. All other components: Five Years. 3. Electronics: Two Years

Inventory
Stock Code Description Color Packaging HCPCS
AE4000 Spring Deck, Manual Hi-Lo, 76″ Length 1 ea E0293

AE4100 Spring Deck, Manual Hi-Lo, 80″ Length 1 ea E0293

AE4200 Spring Deck, Manual Hi-Lo, 84″ Length 1 ea E0293

AE4010 Pan Deck, Manual Hi-Lo, 76″ Length 1 ea E0293

AE4110 Pan Deck, Manual Hi-Lo, 80″ Length 1 ea E0293

AE4210 Pan Deck, Manual Hi-Lo, 84″ Length 1 ea E0293

AE4005 Spring Deck, Semi-Electric, 76″ Length 1 ea E0295

AE4105 Spring Deck, Semi-Electric, 80″ Length 1 ea E0295

AE4205 Spring Deck, Semi-Electric, 84″ Length 1 ea E0295

AE4015 Pan Deck, Semi-Electric, 76″ Length 1 ea E0295

AE4115 Pan Deck, Semi-Electric, 80″ Length 1 ea E0295

AE4215 Pan Deck, Semi-Electric, 84″ Length 1 ea E0295

AE4004 Spring Deck, Full-Electric, 76″ Length 1 ea E0297

AE4104 Spring Deck, Full-Electric, 80″ Length 1 ea E0297

AE4204 Spring Deck, Full-Electric, 84″ Length 1 ea E0297

AE4014 Pan Deck, Full-Electric, 76″ Length 1 ea E0297

AE4114 Pan Deck, Full-Electric, 80″ Length 1 ea E0297

AE4214 Pan Deck, Full-Electric, 84″ Length 1 ea E0297

AB46300 Head and Foot Boards Light Oak Finish

AB48300 Head and Foot Boards Medium Oak Finish

AB80300 Head and Foot Boards Dark Walnut Finish

A7040 Half Head Rails (Set)

A7050 Half Foot Rails (Set)

A7060 3/4 Length Rail- 54″ Length (Set)

A7070 Full Length Rail- 66″ Length (Set)

AZ7350 Assist Bar (1 Each)

A65476 Wall Saver Bumpers, 76″ Bed

A65480 Wall Saver Bumpers, 80″ Bed

AB6800 Wall Saver Bumpers, 84″ Bed

999-0700-355 Factory-Installed options – Pull Pin Pendant L/O CA**

554-0658-000 Factory-Installed options – Edema Foot Ratchet

555-0206-902 Emergency Crank

554-0639-000 Trapeze Adapter

556-0005-000 Traction Frame Adapter (2 Req)

554-0143-000 Trapeze Bar (Patient Helper Bar)

554-0190-000 Panel-Mounted I.V. Holder

554-0713-000 Side Mattress Retainer (Pair)

Manufacturer: Graham Field

Order / Info Request

Lo-Max Full Electric Hospital Bed

4.1.1

The full-electric hospital beds feature durable powder-coated epoxy finish..
Head articulation of 80 degrees for assistance with respiratory ailments.
Foot/knee articulation of 45 degrees.
Accommodates any head or foot board options.
UL 2601-1 and CAN/CSA C22.2 No. 601-1-M90 approved.
The head and foot boards are available with light oak, medium oak or dark walnut finishes.
Designed to meet the requirements of applicable HCPCS codes.
Innerspring mattresses of different sizes for homecare / nursing home care are sold separately.
Warranty:
Welded steel bed frame: Limited Lifetime.
All other components: Five Years.
Electronics: Two Years
Bed Height: 7 1/2″ to 16 3/4″
Sleeping Surface Length: 76″ or 80″
Sleeping Surface Width: 35″
Max. Head Elevation: 80o
Max. Foot / Knee Elevation: 45o
Weight Capacity: 400 lbs.

Manufacturer: Graham Field

Order / Info Request

FULL-ELECTRIC BED

12098-1

*Quiet, smooth operation
*The easy-to-use hand pendant electrically controls the positioning of the upper body, knees, and overall height of the bed frame to provide maximum comfort and versatility for the patient or caregiver
*Side clips under angle iron store shaft when bed is unassembled
*Easy to set up
*Bed ships in two cartons
*Back and foot adjustment allow for an anatomically correct sleep surface
*Channel frame construction provides superior strength and reduced weight
*Zinc coated spring deck
*Reinforced frame resists twisting and bending
*Heavy Duty, vinyl clad bed ends are attractive in any decor and easy to maintain
*Head and foot ends are interchangeable with Invacare and Sunrise
*CSA approved
*Warranty: (Original purchaser) Lifetime on welds, 5 years on frame, 1 year on all other parts and components.Bed Height (Min.) 16″
*Bed Height (Max.) 24.5″
*Overall Length 88″
*Overall Width 36″

Manufacturer: rive Medical Design & Mfg.

Order / Info Request

Flex Bed

12469-1

Fixed Height, Hi-Lo Manual, Semi-Electric and Full-Electric available.
• Available in 76″ and 80″ sleep deck lengths.
• Low position 14.5″, maximum height 26″.
• Available with spring or pan sleep deck.
• Stabilizing legs standard.
• Durable powder-coated epoxy finish.
• 450 lb weight capacity.
• UL 2601-1 and CAN/CSA C22.2 No. 601-1-M90 approved.
• Warranty:
1. Electronics: 2 Years
2. All other components: 15 Years

Manufacturer: Graham Field

Order / Info Request

FULL ELECTRIC BARIATRIC BED

*All steel construction
*Larger sleep surface than conventional bed
*Quiet smooth operation
*Split pan design w/removable bed ends is easy to set-up
*No tools necessary for set-up
*Hand control (included) provides for multiple bed positioning for patients
*Emergency manual crank included
*Bed Height (Min.) 18.25″
*Bed Height (Max.) 26.25″
*Overall Length 88″
*Overall Width 42″

Manufacturer: Drive Medical Design & Mfg.

Order / Info Request

WhisperLite II Low Bed

12464-1

Offering the same great quality and features as the other WhisperLite II series beds, the new WhisperLite II Low Bed adds the safety and peace of mind for caregivers in every home. With a low height of only 9 ½”, injuries from falling out of bed are no longer a great concern. By merely switching the bed ends, one can go from a Full Electric standard height bed to a full electric Low bed. Low cost. Low worries. Low Bed.

• 9 ½” lowest height.
• 20” highest height.
• Ends are self-leveling
• Casters engage at lowest position for bed movement.
• Casters dis-engage when bed is elevated to dis-allow movement of bed
• Bed ends will work with any full electric WhisperLite frame
• Easy to setup
• Head and foot sections adjust with quiet and strong DC motor.
• Weight Capacity 450 lbs.

Manufacturer: Graham Field

Order / Info Request

Eze-Lok

OLYMPUS DIGITAL CAMERA

This bed represents a true engineering breakthrough, combining long term care needs with acute care features. The Eze-Lok™ bed features a single pedal to secure the bed to the floor at any sleep surface height. The color-coded pedals show green for mobile and red for securely-locked.
• 12″ Low deck height. Maximum height is 24″.
• Available in Manual Hi-Lo, Semi-Electric and Full-Electric.
• Available with spring or pan sleep deck.
• Durable powder-coated epoxy finish.
• 450 lb weight capacity.
• UL 2601-1 and CAN/CSA C22.2 No. 601-1-M90 approved.
• Available in 76″, 80″, or 84″ sleep deck lengths.
• Warranty:
1. Electronics: 2 Years
2. All other components: 15 Years.

Manufacturer: Graham Field

Order / Info Request

Zenith

12473-1

The bed that is versatile and designed to meet Long Term Care clinical requirements. From a low 7.9 inches to a high position of 30 inches, the Zenith bed facilitates resident safety and ensures caregiver ease of operation. Powered by three ultra-whisper, rapid-moving, DC motors engineered to keep Hi-Lo function in sync. It’s the only bed that you’ll ever need, and priced so you can afford it!
• Available in 76″ and 80″ sleep surface lengths.
• 450 lb weight capacity.
• Available with steel-wire grid or pan sleep deck.
• All welds and components are electrostatic powder-coated to provide durable finish.
• Standard with eight-function pendant control.
• UL 2601-1 and CAN/CSA C22.2 No. 601-1-M90 approved.
• Designed to meet the requirements of applicable HCPCS codes.
• Warranty: 15 years on bed Two years on Electronics and motors

Manufacturer: Graham Field

Order / Info Request

Alpha Full-Electric Bed

12465-1

The orthopedically designed four section sleep deck can be placed into the following commonly needed positions: Contour, Fowler and Semi-Fowler, Frame Trendelenburg and Reverse Trendelenburg, Cardiac Chair, Nursing or Feeding, Vascular.
• Sleep Deck Low Height 15.50″
• Sleep Deck High Position 26″ – with a 6″ mattress meets stretcher height at 32″
• Built in Stabilizer Legs (Lifts bed off casters in low position – prevents bed movement)
• Staff Control Panel at foot end of bed, allows total operation of all bed function as well as lock out of patient pendant if desired
• Auxiliary crank for power failure emergencies
• Traction frame adaptor is standard on beds with blow molded Hd / Ft bds.
Traction frame adaptor is an extra cost option on beds with laminate Hd / Ft bds.
• Standard with Link Spring Fabric Deck (above picture shown with optional perforated steel pan deck)
• 5″ Caster System. 1 Total Lock, 1 Steer, 2 Swivel.
• Six Integrated IV Sockets (2 – ½” and 2 – ¾” sockets at head; 2 – ½” at seat) on the Alpha beds with Blow Molded Hd and Ft but only four IV Sockets on the Alpha beds with laminate Hd and Ft bds.
• Removable high impact polypropylene foot and head panels with built in tubular push bars for safe and efficient transport or Decorator Laminate Panels
• Uni-body undercarriage is a welded base for strength and durability
• Standard 115 volt UL2601-1 and CAN/CSA C22.2 No. 6014-M90 Approved
• Motor drive units are AC powered with 110/115v or optional 220/240v; all are UL listed.
• Optional 240 Volt available
• Warranty: Electronics: 2 Years – All other components: 15 Years

Manufacturer: Graham Field

Order / Info Request

Zenith™ Full-Electric Bed

11025-1

Product Detail

The bed that is versatile and designed to meet Long Term Care clinical requirements. From a low 7.9 inches to a high position of 30 inches, the Zenith bed facilitates resident safety and ensures caregiver ease of operation. Powered by three ultra-whisper, rapid-moving, DC motors engineered to keep Hi-Lo function in sync. It’s the only bed that you’ll ever need, and priced so you can afford it!
• Available in 76″ and 80″ sleep surface lengths.
• 450 lb weight capacity.
• Available with steel-wire grid or pan sleep deck.
• All welds and components are electrostatic powder-coated to provide durable finish.
• Standard with eight-function pendant control.
• UL 2601-1 and CAN/CSA C22.2 No. 601-1-M90 approved.
• Designed to meet the requirements of applicable HCPCS codes.
• Warranty: 1. Welded steel bed frame: Limited Lifetime. 2. All other components: Five Years. 3. Electronics: Two Years

Inventory
Stock Code Description Color Packaging HCPCS
ZG5074 Grid Deck, Full-Electric, 76″ Length 1 ea E0297

ZG5174 Grid Deck, Full-Electric, 80″ Length 1 ea E0297

ZG5014 Pan Deck, Full-Electric, 76″ Length 1 ea E0297

ZG5114 Pan Deck, Full-Electric, 80″ Length 1 ea E0297

ZZ5074 Grid Deck, Full-Elect. w/ Z-Lok, 76″ Length 1 ea E0297

ZZ5174 Grid Deck, Full-Elect. w/ Z-Lok, 80″ Length 1 ea E0297

ZZ5014 Pan Deck, Full-Elect. w/ Z-Lok, 76″ Length 1 ea E0297

ZZ5114 Pan Deck, Full-Elect. w/ Z-Lok, 80″ Length 1 ea E0297

Z46500 Head and Foot Boards Light Oak Finish

Z48500 Head and Foot Boards Medium Oak Finish

Z80500 Head and Foot Boards Dark Walnut Finish

Z46550 Head and Foot Boards, Staff Control Option Light Oak Finish

Z48550 Head and Foot Boards, Staff Control Option Medium Oak Finish

Z80550 Head and Foot Boards, Staff Control Option Dark Walnut Finish

ZA7020 Half Head Rails (Set)

ZA7170 Half Foot Rails (Set)

AZ7350 Assist Bar (1 Each)

Z70300 Wall Saver Bumpers, 76″ or 80″ Bed

ZL71510 Factory-Installed option – Single-Function Lock-Out

ZL71530 Factory-Installed option – Three-Function Lock-Out

ZL74700 Factory-Installed option – Embedded Staff Control

999-0711-005 Factory-Installed option – Grounded Hospital-Grade Plug

554-0748-000 Factory-Installed option – Edema Foot Ratchet

554-0710-000 Stabilizer Legs

554-0719-000 4″ Sleep Deck Extension

999-0711-003 Back-Up Battery Pack

999-0711-002 Back-Up Battery Charger

554-0720-000 Trapeze Adapter

554-0143-000 Trapeze Bar (Patient Helper Bar)

554-0190-000 Panel-Mounted I.V. Holder

554-0713-000 Side Mattress Retainer (Pair)

Manufacturer: Graham Field

Order / Info Request